Allied-telesis AT-DC2552XS Manuale Utente Pagina 54
- Pagina / 84
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Chapter 3: Installing the Switch and Modules
54
Replacing Fan
Module
The AT-FAN06 fan module is hot swappable within the chassis. The
power to the chassis can remain ON while one of the fan modules is
replaced. The following procedure assumes a second AT-FAN06 fan
module is already installed and operating.
Perform the following procedure to replace an AT-FAN06 fan module:
Warning
The chassis cooling is designed to operate with two fan modules
operating together. To avoid overheating of the AT-DC2552XS
chassis, please complete the following procedure within one minute.
1. Loosen the captive screws on the AT-FAN06 fan module.
2. Gently pull the handle of the AT-FAN06 fan module to remove it from
the chassis.
3. Slowly insert the new AT-FAN06 fan module into the vacant fan slot
until it is flush with the front of the chassis.
The new AT-FAN06 fan module immediately powers up assuming the
chassis power supplies are turned on.
4. Tighten the captive screws to fasten the fan module to the chassis.
See Figure 23.
- Installation Guide 1
- Radiated Energy 3
- Industry Canada 3
- Translated Safety Statements 4
- Contents 5
- Document Conventions 12
- Contacting Allied Telesis 13
- Overview 15
- AT-DC2552XS Features 16
- Installation Options 17
- Power Supply/Fan Modules 17
- Optional SFP+ Transceivers 17
- Management Methods 18
- Optional QSFP+ Transceivers 18
- AT-DC2552XS 19
- Physical 19
- Description 19
- Chapter 1: Overview 24
- NET MGMT 26
- Console Port 29
- AT-PWR06 Power Supply Module 30
- AT-FAN06 Fan Module 32
- Beginning the Installation 33
- Installation Overview 34
- Reviewing Safety Precautions 35
- Planning the Installation 39
- Unpacking the Switch 40
- AT-PWR06 41
- Power Supply 41
- AT-FAN06 Fan 42
- Chapter 3 43
- Installing Power 48
- Supply Module 48
- Replacing Power 50
- Supply Blank 51
- Installing Fan 52
- Replacing Fan 54
- Transceivers and Cables 55
- Guidelines 56
- Installing SFP+ 57
- Transceiver 57
- Installing a SFP+ 59
- Direct Attach 59
- Installing a 61
- QSFP+ MTHTP 63
- Powering the Switch 65
- Powering On the Switch 66
- Console port 67
- Turn Off the switch 68
- Managing the Switch 69
- Local Management 70
- Stop bits: 1 71
- Flow control: None 71
- Remote Network Management 72
- Troubleshooting 75
- Chapter 7: Troubleshooting 78
- Technical Specifications 79
- Power Specifications 80
- Certifications 80
- Quality and Reliability 80
Prodotti e manuali riguardandi Hardware del computer Allied-telesis AT-DC2552XS
(142 pagine)CICLOSPORT CP 13 IS manuales
Manuales del propietario y guías del usuario para Relojes deportivos CICLOSPORT CP 13 IS.
Ofrecemos 1 manuales en pdf CICLOSPORT CP 13 IS para descargar gratis por tipos de documentos: Instrucciones de operaciones
Commenti su questo manuale