Allied-telesis AT-S97 Manuale Utente Scaricare il pdf (Pagina 75)

AT-S85 and AT-S97 Management Software User’s Guide

Note

When the AT-MCF2000M Management Module is reset, it will be

unresponsive to commands for approximately one minute while it

initializes its AT-S97 Management Software.

Review the following before performing this command:

 The command does not affect the power supply and fan modules.

 If the chassis you’re resetting has the management module, you’ll

have to reestablish your management session after the module has

initialized its AT-S97 Management Software, if you want to continue to

manage the unit. The initialization process takes approximately one

minute to complete.

Note

Any parameter settings that you have not saved in the active master

configuration file on the management module are discarded during

the reset. To save your changes, use the CONFIG SAVE command.

For instructions, refer to “CONFIG SAVE” on page 161.

 To reset individual modules, refer to “SYSTEM RESET MODULE” on

page 78.

Examples

This command resets the chassis with the ID number 0:

system reset chassis id=0

This command resets the chassis with the ID number 2:

system reset chassis id=2

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 247 248

Nessun commento

Allied-telesis AT-S97 Manuale Utente Pagina 75