Allied-telesis AT-2912T Manuale Utente Scaricare il pdf (Pagina 72)

Enabling LINUX

Unloading and Removing the Driver

To unload the driver, use the ifconfig command to bring down all eth#

interfaces opened by the driver. Then enter the following command:

rmmod tg3

Note

On all 2.6 kernels, you do not need to bring down the eth# interfaces

before unloading the driver module.

If the driver was installed using rpm, enter the following command to

remove it:

rpm -e tg3

If the driver was installed using the make install command from the tar file,

you need to manual delete the driver tg3.o (or tg3.ko) from the system.

Refer to “Installing the Source RPM Package” on page 67 for the location

of the installed driver.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 91 92

Nessun commento

Allied-telesis AT-2912T Manuale Utente Pagina 72