Allied-telesis AT-S95 CLI (AT-8000GS Series) Manuale Utente Scaricare il pdf (Pagina 183)

100

101

LLDP Commands

Page 183

Example

The following example displays the Link Layer Discovery Protocol (LLDP) configuration:

The following table describes the significant fields shown in the example:

show lldp med configuration

The show lldp med configuration Privileged EXEC mode command displays the LLDP MED configuration.

Syntax

show lldp med configuration [ethernet interface]

console# show lldp configuration

State: Enabled

Timer: 30 Seconds

Hold multiplier: 4

Reinit delay: 2 Seconds

Tx delay: 2 Seconds

Port State Optional TLVs Address

---- ----- ------------- -------

1/g1 RX, TX PD, SN, SD, SC 172.16.1.1

1/g2 TX PD, SN 172.16.1.1

1/g2 Disabled

Field Description

Timer Specifies how often the software sends LLDP updates.

Hold multiplier Specifies the amount of time the receiving device should hold an LLDP packet

before discarding it.

Reinit timer Specifies the minimum time an LLDP port waits before reinitializing LLDP

transmission.

Tx delay Specifies the delay between successive LLDP frame transmissions initiated by

value/status changes in the LLDP local systems MIB.

Port The port number.

State The port LLDP state.

Optional TLVs Optinal TLVs that are advertised. Possible values are:

• PD – Port description

• SN – System name

• SD – System description

• SC – System capabilities

Address The management address that is advertised.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 396 397

Commenti su questo manuale

Nessun commento

Allied-telesis AT-S95 CLI (AT-8000GS Series) Manuale Utente Pagina 183

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware del computer Allied-telesis AT-S95 CLI (AT-8000GS Series)